Infant Incubator Servo + Skin Control

Infant Incubator Servo + Skin Control

Infant Incubator Servo + Skin Control

Spesifikasi Infant Incubator Servo + Skin Control :

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100% ; the infant bed can be pulled out from the side door

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, I.V. Pole, stand.

Technical specification:
Power supply : AC220V 50HZ
Power input: 600VA
Air Temperature control range 25 ~ 37

Changing of temperature: d0.5
Uniformity of temperature: d0.8
Temperature rising time: d45min
Noise level: d55dB A
Alarming :
audible and visible alarm indication, and it can indicate the real temperature and cut off  the power supply of heater.
Over-temp alarm: when the temperature control d38

Deviation alarm: ± 3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed d1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.
Gross Weight 72Kg
Measurement 1085mm× 640mm× 1065m

Harga : Rp. 43.500.000,-

Artikel Terkait:

  • Tidak Ada Artikel Terkait